Active Brazing Alloys

Product Uses and Applications

Active brazing alloys are used for joining a variety of ceramic and cermet components. They eliminate the need for metallising providing savings in time and cost. Active brazing alloys are available in silver, titanium and copper based materials. These products are used in specialised electronic components and tooling applications.

Key ProductsAgCuTiInOtherMelting Range °CProduct Info
Meta-Braze Cu 93Ti-92.752.25-2 Al, 3Si958-1024View product info

Meta-Braze Cu 93Ti

Meta-Braze Cu 93Ti is an active brazing alloy paste of a copper based alloy with silicon, titanium and aluminium. It is intended for direct application to ceramic surfaces such as oxides, nitrides and carbides and will also wet metallic surfaces. Under the right brazing conditions Meta-Braze Cu 93Ti can enable ceramic-to-ceramic and ceramic-to-metal surfaces to be brazed without metallizing.

Product Forms

  • foil
  • powder
  • braze-paste

Downloads

×
Meta-Braze Ag 93Ti92.7551.25-1 Al860-912View product info

Meta-Braze Ag 93Ti

Meta-Braze Ag 93Ti is a silver based active brazing alloy paste with additions of silicon, titanium and aluminium. It is intended for direct application to ceramic surfaces such as oxides, nitrides and carbides and will also wet metallic surfaces. Under the right brazing conditions Meta-Braze Cu 93Ti can enable ceramic-to-ceramic and ceramic-to-metal surfaces to be brazed without metallizing.

Product Forms

  • foil
  • powder
  • braze-paste
×
Meta-Braze Ag 69Ti68.826.74.5--780-900View product info

Meta-Braze Ag 69Ti

Meta-Braze Ag 69Ti is a high purity silver-copper-titaniumbrazingalloy which is active on non-metallised ceramic materials. It is available as a wire, foil or paste. Meta-Braze Ag 69Ti provides a good solution for brazing of PCBN as well as on other non-metallics such as oxides, nitrides and carbides. With the right conditions it can enable ceramic-to-ceramic and ceramic-to-metal surfaces to be brazed without metallizing.

Product Forms

  • foil
  • powder
  • braze-paste
×
Meta-Braze Ag 63Ti6335.251.75--780-815View product info

Meta-Braze Ag 63Ti

Meta-Braze Ag 63Ti is a silver-copper-titaniumactive brazing alloy designed to for direct application to ceramic surfaces. It will wet any non-metallics such as oxides, nitrides and carbides as well as wetting metallic surfaces. With the right brazing conditions it can join both ceramic-to-ceramic and ceramic-to-metal surfaces without metallizing.

Product Forms

  • foil
  • powder
  • braze-paste
×
Meta-Braze Ag 59Ti5927.251.2512.5-606-715View product info

Meta-Braze Ag 59Ti

Meta-Braze Ag 59Ti is a silver-copper-indium-titanium brazing alloy designed to provide a low temperature option for active brazing processes. It is available inwire, foil or paste form. Meta-Braze Ag 59Ti is a good option for solid PCD as it melts below the temperature where heat damage could occur to the PCD during brazing.

Product Forms

  • foil
  • powder
  • braze-paste

Downloads

×